How to Do a Salon Blowout at Home: Smooth, Bouncy Hair Step by Step

The salon blowout technique step by step: prep, rough-drying, sectioning, round brush work and the cool shot, plus how to make your blowout last for days.

There’s something about a fresh salon blowout: smooth, shiny, bouncy hair that moves when you walk. Most people think it’s impossible to get at home, but the difference between a salon result and a home result is mostly technique, not the tools. After years of styling hair for weddings and shoots, here’s the method I teach clients who want salon hair without the salon.

What you’ll need

  • A hairdryer with a concentrator nozzle (the narrow attachment), ideally with heat and speed settings and a cool shot button
  • A round brush (the size depends on your hair length, see below)
  • A paddle brush or wide-tooth comb
  • Sectioning clips
  • Heat protectant
  • A volumizing mousse or root lift spray (optional)
  • A smoothing cream or serum

Choosing a round brush

Hair length Brush diameter Result
Short (bob or shorter) Small, about 1–1.5 in (2.5–4 cm) Volume and bend at the ends
Medium (shoulder) Medium, about 2 in (5 cm) Body and soft movement
Long Large, 2.5–3 in (6–8 cm) Smoothness and big, bouncy ends

Ceramic or metal barrels heat up and act a bit like a curling iron; boar or mixed bristles grip and smooth the hair.

Step 1: Start with the right wash

Use a shampoo and conditioner suited to your hair: volumizing for fine hair, smoothing for thick or frizzy hair. Apply conditioner mostly to the mid-lengths and ends. Gently squeeze out excess water with a microfiber towel or a cotton T-shirt; rubbing with a regular towel creates frizz.

Step 2: Apply products

Spray heat protectant evenly through the hair. For volume, add mousse or root lift spray at the roots. For smoothness, a pea-sized amount of smoothing cream on the mid-lengths and ends. Comb through with a wide-tooth comb to distribute.

Step 3: Rough-dry to 80%

This is the step that saves the most time. Using your fingers (no brush yet), dry your hair on medium heat, moving the dryer constantly and pointing it down the hair shaft to keep the cuticle smooth. Lift the roots with your fingers for volume. Stop when your hair is about 80% dry: it should feel almost dry, with only slight dampness.

Artist tip Using a round brush on soaking-wet hair takes forever and adds more heat exposure. Rough-drying first, then styling the last 20% with the brush, is how stylists work fast and keep hair healthy.

Step 4: Section

Divide the hair into sections and clip them up: usually two at the back (left and right), two at the sides, and the top/crown. Start with the lower sections at the back of the neck. Working in small, organized sections is what gives a smooth, even finish.

Step 5: The round brush technique

  1. Take a section of hair about the width of your brush and about 1 to 2 inches deep.
  2. Place the brush under the section at the root. Attach the concentrator nozzle to the dryer and point the airflow down the hair, from the root to the ends, always in the direction of the brush.
  3. For volume, lift the brush up and away from the scalp while drying the root for a few seconds.
  4. Slowly pull the brush down the section, keeping tension and following it with the dryer.
  5. At the ends, roll the brush under (for a bend under) or out (for flipped ends) and hold the heat for a few seconds.
  6. Press the cool shot button for a few seconds before releasing. The cool air sets the shape.
  7. Repeat on each section, two or three passes per section, until completely dry.

Step 6: The crown and the front

The top sections decide the volume. Lift each section straight up from the scalp and dry the roots upward, then roll the brush back. For the front, dry the hair away from your face to create an open, glamorous shape. For curtain bangs, dry them forward and then roll them back to each side.

Step 7: Set the volume

For maximum bounce, roll each top section around the round brush or a large velcro roller once it’s dry and warm, and leave it to cool for a few minutes while you do your makeup. Remove the rollers and gently shake the roots with your fingers.

Step 8: Finish

  • A drop of serum or oil on the ends for shine.
  • A light mist of flexible hairspray for hold.
  • If needed, smooth the top layer with a paddle brush and a quick blast of cool air.

Making your blowout last

  • Sleep on silk or satin to reduce friction and frizz.
  • Loose high bun: twist your hair into a loose bun at the top of your head with a soft scrunchie before bed to keep volume.
  • Dry shampoo: on day two or three, apply at the roots before they look oily.
  • Avoid steam and humidity: wear a shower cap and, if it’s very humid, an anti-humidity spray.
  • Refresh: use the round brush and the dryer for a minute on the front sections to revive the shape.

Blowouts for different hair types

Fine hair: use volumizing mousse, smaller sections, and lift the roots well. Avoid heavy serums. Thick hair: rough-dry thoroughly first and use a large brush and a powerful dryer. A smoothing cream helps. Curly hair: a blowout can straighten curls temporarily; use a strong heat protectant and take your time. Many people with curly hair prefer to get this done professionally. Color-treated or damaged hair: use lower heat and protectant every time, and don’t blow out daily.

Common mistakes

  • Starting with soaking-wet hair.
  • Skipping the concentrator nozzle (air everywhere = frizz).
  • Pointing the dryer up the hair shaft instead of down.
  • Sections that are too big.
  • Releasing the brush before cooling the section.
  • Using the hottest setting all the time.

Holding the dryer and brush: the hand position

The hardest part for beginners is coordinating two tools at once. Hold the round brush in your dominant hand, since it needs the most control, and the dryer in the other. Keep the dryer nozzle a few inches away from the brush, never pressed against the hair, and always pointing down the length. If your arms get tired, sit down and rest your elbows on a table, and work in smaller sections. Some people find it easier to dry the back with the head tilted slightly forward. With practice, the movements become automatic: roll, pull, follow with the dryer, cool shot, release.

A protective routine between blowouts

Blowouts are a form of heat styling, so a little care keeps your hair healthy. Use a deep-conditioning mask once a week, trim the ends every few months to prevent split ends, and avoid tight elastics on blown-out hair, which leave dents and cause breakage. On days off from heat, braids or a loose bun protect the ends. If your hair feels dry or straw-like, lower the dryer’s heat setting and increase the time instead; medium heat with a strong airflow is usually enough for a smooth finish.

FAQs

How long does a home blowout take?

For medium-length hair, about 25 to 40 minutes once you have practice. Rough-drying first saves a lot of time.

Do I need an expensive dryer?

Not necessarily. A dryer with a concentrator nozzle, a cool shot and two heat settings is enough for a great blowout.

How often can I blow-dry my hair?

With heat protectant and medium heat, a few times a week is fine for most hair. Give your hair breaks with heatless styles.

Can I use a hot air brush instead?

Yes. Hot air brushes combine a brush and a dryer and are easier for beginners, though they’re usually less powerful on thick hair.

The first few blowouts will take longer, and your arms will get tired, but each time you’ll get faster and smoother. Soon, you’ll have salon-worthy hair whenever you want it. For curls instead of smoothness, try curling with a flat iron.

Bianca Añez
Bianca AñezMakeup & Hair Artist · Licensed Facial Specialist

Miami-based makeup and hair artist and licensed facial specialist with more than 10 years of experience, specializing in bridal and special-occasion beauty. More about Bianca →